Kiss my Attitude

166-1 by Elias Chatzoudis (HERE)

"Skull and Bones" by TK Designs (HERE)

“Marlena” (NAME)

Attitude Template by Denise (HERE)

Eye Candy 4000 Glass

Open the template, resize to 800 widths and then a canvas resize to 900 widths; flood-fill white.

Open the half body tube and add above all layers. I duplicated and added above each template layer and then removed the excess.

Open the close up tube, resize by 65% and add above the Raster 8 layer. Add until you get the desired look.

Use ScrapTK_SkullsNBones-paper6 to replace Raster 1. Invert Raster 1 colour, outline with black by 4 and then add a hard noise.

Use ScrapTK_SkullsNBones-paper5 to replace Rasters 2 and 3; outline white by 4 and add your noise.

Use ScrapTK_SkullsNBones-paper8 to replace Rasters 6 and 7; outline white by 4 and add your noise.

Use ScrapTK_SkullsNBones-paper3 to replace Raster 9. I used Eye Candy Glass to get it depth and then outlined it black.

I duplicated the word art layer and moved one above the tube. Remove the upper letters from over the tube and leave the lower letters there.

Use ScrapTK_SkullsNBones-paper3 to replace the black "T"s in the upper layer. When I did my glass setting (lower letters), I simply used my colour picker and clicked on paper 3 to give the white letters colour. Do the same glass setting for the upper word art layer as well.

Outline the upper and lower word art layers with black and add a shadow.

On Raster 4, add your noise setting and a dark shadow.

Move Raster 5 above the frame layer and add your noise setting.

On Raster 10, add noise and a dark shadow.

Add ScrapTK_SkullsNBones-element36 under the word art (lower right). In the upper left, resize by 75% and add above the frame layer.

Add ScrapTK_SkullsNBones-element9 above the paper 8 layer, drop shadow and remove excess.

Open ScrapTK_SkullsNBones-element25, resize by 30% and add below the upper heart layer.

Open ScrapTK_SkullsNBones-element25, resize by 40% and add below the lower right heart layer.

Add ScrapTK_SkullsNBones-element20 and duplicate (then move) to get the desired look.

Add ScrapTK_SkullsNBones-element10 below the upper word art layer.

Crop as close as you can to the design, resize (if needed) before adding your name and copyright; upload to enjoy.