Alpine Adventures

 "Alpine Adventures" by Jennifer Fehr (HERE)

Rudolph by Very Many (HERE)

Template by Dee (HERE)

Mask 80 by Vaybs (HERE)

“Puppy” (Alpine and Name)

"Pantherdam Signature" (Adventures)

Eye Candy 4000 Bevel Boss

Penta Dot and Cross

Open the template, resize to 800 widths and then do a canvas size to 900 widths; save. Remove all wording.

Open the tube and grab the appropriate tube. I did not resize, but added the image as is, to give a bigger effect. Duplicate and remove all the excess on the lower layer; drop shadow the upper layer and remove excess with an eraser.

Use spd-alpineadventures-pp2, after a 20% resize, to replace layers center gold circle, and left top and top right green rectangles. I used a 25% resize to replace the gold oval layer.

Use spd-alpineadventures-pp3, after a 25% resize, replace the bottom layer left/right green rectangles. I used a 20% resize to replace layer center green strip.

Use spd-alpineadventures-pp5, after a 20% resize, to replace the cream squares layers. I manually did this with my paper, moving it to where I wanted it to be, and then removed the excess; merge together once completed.

Use spd-alpineadventures-pp6, after a 25% resize, replace the bottom and top red rectangles. Again, I did this manually, so that I only viewed the wood slats in my rectangles.

I used 0E5423, which I pulled from Rudolph, to create my mask layer. I added this in two places and moved them around to get my desired effect, then added a Penta Dot and Cross to enhance the overall look, before dropping the opacity to 200.

Open spd-alpineadventures-stamp, resize by 30% and add above the mask layer; duplicate, mirror and flip, and then position at the top.

Open spd-alpineadventures-confetti, resize by 30% and add above the stamp layer in two spots; merge together after a drop shadow.

Open spd-alpineadventures-foliage2, resize by 20% and add between the paper 6 layers.

Open spd-alpineadventures-flower3, resize by 60% and add above the foliage 2 layer; manually rotate to your liking. I also added another, after a 50% resize, above the scatter layer, to the left.

Open spd-alpineadventures-foliage1, resize by and add between the two paper 6 layers. I duplicated this and moved one above the foliage 2 layer.

Open spd-alpineadventures-snowflake1, resize by 50% to add above the paper 3 layer. I also added some in other locations as well.

Crop as close as you can to the mask/paint layers, resize (if needed), before adding your name and copyright. Upload to enjoy.