Shamrocks and Shenanigans

 "Crazy Girl" by Elias Chatzoudis (HERE)

O'Scrap BT by Crazy Cat Creations (HERE)

Template by Sylly (HERE)

Pixel Operator (HERE)

“Scandinavia Brush” (NAME)

Download the template and open the template we are using. Resize to 850 widths, a canvas resize to 950 widths, flood fill the bottom layer white and then sharpen all word art.

On the dark green rectangle layer: add a new layer, flood-fill white, remove the excess, outline white by 7 and then add the noise below.

On the "text: shenanigans" layer: add a new layer, flood-fill with 6D8042, and then remove all excess (including the center of the letters); add noise at 60, instead of the 30 above.

Hide the "text pixel" layer: use the same colour 6D8042 for the text on a new layer. I kept duplicating and moving mine to get the look that I wanted, then outlined white and drop shadowed.

Outline the dotted squares layer by 2 in white. To get my look, I duplicated, mirrored and flipped one (then drop shadowed), drop shadowed the original layer, and then removed the outside outline before merging.

Open CCC_CutestClover ele (12), resize by 65% and add above the shamrock 2 layer. Position, outline white by 2 and then drop shadow.

Open CCC_CutestClover ele (15), resize by 40% and add above the shamrock 1 layer. You may have to play with your rotation but mine is below. (Move to the top of all layers when completed.)

Outline this layer in white by 2 and flip before your drop shadow.

I did not resize any of the papers that I used, but I did sharpened each by 2 after I removed the excess.

Use CCC_CutestClover paper (1) to replace the template layer small green rectangle.

Use CCC_CutestClover paper (2) to replace the template layer dark green rectangle right.

Use CCC_CutestClover paper (6) to replace the template layers dark green rectangle left and light green rectangle.

Use CCC_CutestClover paper (5) to replace the template layer large green rectangle.

Use CCC_CutestClover paper (3) to replace the template layer green rectangle.

Open the tube, resize the height to 704, sharpen by 2, mirror, and then change the colour to black and white.

Add CCC_CutestClover ele (6) above the tube layer, remove the right side once the element is positioned, and then drop shadow.

Open CCC_CutestClover ele (2), resize by 40% and add under the white noise rectangle we created.

Open CCC_CutestClover ele (9), resize by 60% and add above the element 12 layer.

Add another CCC_CutestClover ele (6) over the fence layer.

Add CCC_CutestClover ele (19) below the fence layer.

Open CCC_CutestClover ele (3), resize by 30% and add above the pixel text layer and the fence layer. 

Crop as close as you can to the design, without cutting off any mask layer.  Resize, if needed, before adding your name and copyright information. Upload to enjoy.